How To Get Rid Of Static Noise from Car Speakers

Is your car speaker producing irritating noise or static sound? It is annoying to listen to the loud popping or crackling noises instead of your sweet track. It can make your journey a dull and lifeless. In fact, it is a sign that your speaker isn’t going well and most probably it is damaging. Perhaps, the problem is in your cable, in the speaker, in the power or any other equipment.

As sound is sent to the speaker through wire or wireless, distortion in any device can make it irritating. Here are some tips you can follow to get rid of static noise from car speakers.

Causes of Creating Static Noise from Car Speakers

So, before we’re heading in the deep to restate the sound, let’s find the actual problem for what you are experiencing this static noise.

Damaged Speakers

Apparently, 95% problems of static sound come from damaged speakers. The damaged cone produces a lot of vibration which creates static and extra noise. Sometimes your speaker may be torn or loose which can’t vibrate precisely. Along with that, something can be contacted with the speaker when sound is produced. Ultimately, the single particles of the speaker play a vital role for sound flowing. If anything doesn’t work well, the sound quality won’t be up to the mark. So, have a deep look on the speaker at first when you experience bothersome sound.

Excessive Power

Though power is essential to make sound loud and clear, excess power creates distortion-type in the music. Only speakers or amplifiers can’t control the power of the electricity. So, when you hear distortion in the sound, you should look upon the electricity as well as its power. On the other hand, distortion while recording may not be avoidable. Hence, you can turn down the volume on the speaker. It helps to listen to the music distortion-free although the sound is too low.

Old Amplifier

Sometimes an old amplifier produces crackling and irritating sound. So many uses of transistors and capacitors may be over time. Also, the connections by which the sockets hold the transistors and capacitors may be corroded and loose. And the most important, loud bass music produces excessive vibrations which cause static sound.

Loose Connection

Wires are the component that carries the sound as well as the power from an external source to the speakers. However, a wireless connection is available, but it is slightly more priced. On the other hand, long wired connection requires more power and becomes loose.

Though you can repair the long wire, you can’t use it after several times repairing. Even, sudden connection loses in the mid of long journey can come to an end of “would be” memorable journey. And of course, you may not have enough instruments to repair the wire perfectly.

Unexpected Interference

Electromagnetic radiation is obvious, and you can’t avoid it at all. It comes from almost all the electronic devices. In fact, no matter your speaker is wired or wireless, it will produce radiation. Likewise, television, radio, microwave oven, Wi-Fi Routers, mobile phones and refrigerator, the car speaker also emit EMR.

So, when it comes to the connection of the other electronic devices, a static sound may be produced. By the way, some specially designed car speakers have come that can produce a minimal static sound that you’ll hardly listen.

How to Get Rid Of Static Noise from Car Speakers

How to Get Rid Of Static Noise from Car SpeakersAs the first step of solving any issue is to find out the problem, we have gone through the issues that can create static sound. Now, you have a clear idea of which reason is in behind of creating such an irritating noise. Now, let’s take steps in solving the problem and enjoy the awesome sound.

Each problem has a distinctive way to solve for the best experience. Some are critical, and some are easy to go. For example, if the wire becomes loose from the speaker, you can glue it faster for preventing vibration. Also, you may remove something that is touched with the speaker to produce static sound.

So, follow the next steps and go for the easiest way.

Turn off your car sound system

If you think that problem is in the wire, you have to test the wires. At first, turn off the car sound system and disconnect the amplifier from the sound system. Then fit it well to the speaker or re-position the wires. Maybe your problem is firmly solved. However, if the problem still exists, change the position of the speaker.

Use a Magnetic Shielding Foil

Your speaker may produce static sound if radiated static noise exists there. To test the source, pull the receiver from the dashboard. You have to do it while the soundtrack is going on full swing. If the static noise fades away after pulling the dashboard, then the problem is in your car sound system. Here, put a magnetic shielding foil beside the sound system. This foil receives the wraps and prevents static noise.

Check Power

If the static noise still exists after testing the above steps, the problem may be in your car power system. So, test the car battery with fluid. If the car battery is old and cankered, it is best to contact a mechanic. Sometimes less power is responsible for the static noise which you can minimize by adding a new car battery.

Install a noise filter

And finally, we are at the end of the recommended ways. If you find no problem with your sound system, wire connection or battery power, consider installing a noise filter.  This filter prevents poor grounding which produces static sound.

Final Remarks

The static sound makes your moment an irritating one. Even, it can turn your sweet moment to a dull one. So, always try to use the best speaker which produces a buoyant and brisk sound. Beyond that, if you experience a little bit of noise, never ignore it. Try to find out the reason behind it and fix the problem. Happy listening to the music!

We will be happy to hear your thoughts

      Leave a reply

      two + 7 =